China Hot selling Motorcycle Transmission Chain X-Ring Super Heavy Duty X-Ring Chain with Connecting Link

Product Description

Product Parameters


Product Name

Motorcycle Gear & Chain Kit 530 


Alloy Steel

Chain NO


Pitch (mm)


Bush Type




Pin Dia.(mm)


Pin Length(mm)


Roller Dia(mm)


Plate Thickness Inner(mm)


Plate Thickness Outer(mm)


Tensile Strength(kn)





Product Details


  • SFR Super O-Ring chain is a light-weight design of high-performance sealing chain, maintaining maximum strength while reducing the chain width and weight. The optimized O-ring overcomes the shortcomings of ordinary sealing chain, offering 150% lifespan of ordinary O-ring.
    Silver outer + black inner, CHINAMFG outer + black inner colour configurations available. migh wear-resistant, maintenance-free lubrication , low cost O-rings


Product Packing

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

Product Usage


We strongly recommends you to lubricate a new connecting link before connecting both ends of the new chain(Fig. B) Clip type connecting link (FJ,RJ) The open end of the clip must be set opposite the chain drive direction(Fig. C). FJ type connecting link has Press Fit Outer Plates that require SFR Cutting &Riveting Tool to press on the side plates. Rivet type connecting link(ZJ) Use MOTOMAX KM500R Cutting & Riveting Tool to press fit connecting link plates and precisely rivet pin head by flare dimensions we recommend. 5.For chain sag adjustment, follow the recommendation in motorcycle owner’s manual. Standard chain sag with the load of riders is 10 mm(Fig. D).


1.Be sure to consult your distributor / local dealer or check with SFR chain catalogue or application chart whether this chain and connecting link are applicable for your motorcycle. Improper selection and use may cause serious damage or injury.

2.Cut the old chain at its joint part. If your motorcycle came with an endless chain or a chain with Rivet type connecting link(ZJ), use SFR Cutting & Riveting Tool or similar cutting tool.

3.Fit the new chain to the end of the old one, using a new connecting link. By turning the rear wheel, the new chain will come in position(Fig. A) 


  • Motorcycle Chain Handing Instructions

Drive chain is a critical safety part for motorcycle driving. To ensure safe drive, you are kindly requested to peruse and observe your motorcycle owner’s manual and the following instructions.


Company Introduction

SFR Chain Group has been pushing its way to the leading positions in the industrial chain industry since last century.

With stringent quality controls, we strive to exceed our customers’ expectations in terms of quality and service. Our products aresold to more than 80 countries in every industry that requires moving, conveying, lifting or transmitting power.





Our Services & Strength

With a monthly production output of over 2.2 million pieces, SFR motorcycle chain is the cornerstone of the group. As 1 of theWorld’s top manufacturers of motorcycle chain, we serve some of the largest brands in the automotive sector and within our widerange there is always a chain to go with every power and use, from urban mopeds to high powered racing motorbikes, dirt bikes orATV quads.


SFR operates 4 fully owned factories and 1 joint venture, certified by ISO9001 and IATF 16949 Quality Management System. Ourcommitment to R&D led SFR to establish stable cooperation with several CHINAMFG universities and research institutes in China,as well as setting up an Intelligent Chain Drive Research Center within the group, altogether resulting in its more than 70
patents. This allows us to offer the widest range of power transmission and conveyor chain at the most competitive prices.We at SFR Chain always adhere to the group’s spirit of integrity, efficiency and innovation: “We strive to offer the best productsand service to our customers”.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 1 Year Guarantees
Type: Motorcycle Chain
Material: Alloy Steel
Certification: ISO9001:2001, CE
Number of Row: Single/Double/Triplex
Surface Treatment: Zinc Plated, Gold Coated, Copper Coated
US$ 5/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

transmission chain

How does the length of a transmission chain impact its performance?

The length of a transmission chain plays a significant role in its overall performance and functionality. Here’s a detailed explanation:

1. Proper Fit and Function: The length of a transmission chain needs to be carefully selected to ensure it fits and functions correctly within the designated system. If the chain is too short, it may not be able to reach the sprockets or pulleys properly, leading to ineffective power transmission and potential chain slippage. On the other hand, if the chain is too long, it may sag, create excessive tension, or cause interference with other components, resulting in inefficient operation or premature wear.

2. Tension and Slack Control: The length of a transmission chain affects the tension and slack control within the system. A properly tensioned chain ensures optimal power transmission, reduces backlash, and minimizes the risk of chain derailment. The chain length must be adjusted to maintain the appropriate tension throughout the operating cycle, considering factors such as load variations, temperature changes, and system dynamics.

3. Flexibility and Bending Requirements: The length of a transmission chain influences its flexibility and bending characteristics. Longer chains may have a higher degree of flexibility, allowing them to navigate complex paths or accommodate greater distances between sprockets or pulleys. However, excessive chain length can lead to excessive bending, resulting in increased friction, wear, and potential premature failure.

4. Sprocket Interactions: The length of the transmission chain affects its interaction with the sprockets or pulleys. The number of chain links determines the engagement between the chain and the teeth of the sprockets. Proper length ensures smooth engagement, minimal tooth wear, and efficient power transfer. Incorrect chain length can cause misalignment, increased noise, and accelerated sprocket or chain wear.

5. System Efficiency and Performance: The length of a transmission chain directly impacts the overall efficiency and performance of the system. A properly sized chain ensures optimum power transmission, minimal energy losses, and reliable operation. By selecting the appropriate chain length, system designers can maximize efficiency, minimize wear, and optimize the lifespan of both the chain and related components.

When selecting the length of a transmission chain, it’s crucial to consider the specific requirements of the application, including the distance between sprockets or pulleys, the desired tension, and the expected load conditions. Consulting with chain manufacturers or industry experts can provide valuable guidance in determining the appropriate chain length for optimal performance and longevity.

transmission chain

What are the benefits of using a high-strength transmission chain?

Using a high-strength transmission chain offers several advantages in various applications. Here’s a detailed answer to the question:

1. Increased Load Capacity: A high-strength transmission chain is designed to withstand higher loads and transmit greater amounts of power. It provides enhanced load-carrying capabilities, making it suitable for applications that require heavy-duty operation.

2. Improved Durability: High-strength transmission chains are constructed using high-quality materials and advanced manufacturing processes. This results in superior durability, increased resistance to wear, and improved resistance to fatigue failure. It ensures that the chain can withstand demanding operating conditions and extended service life.

3. Enhanced Safety: The use of a high-strength transmission chain enhances safety in applications where there is a high load or the potential for sudden dynamic forces. It reduces the risk of chain failure, breakage, or unexpected downtime, minimizing the chances of accidents and ensuring a reliable and secure power transmission system.

4. Compact Design: High-strength transmission chains offer a higher strength-to-size ratio, allowing for a more compact and lightweight design compared to standard chains. This can be beneficial in applications with limited space or weight restrictions.

5. Increased Efficiency: High-strength transmission chains typically have lower friction losses, resulting in improved overall system efficiency. The reduced friction ensures efficient power transfer, minimizes energy waste, and contributes to cost savings.

6. Versatile Application: High-strength transmission chains can be utilized in a wide range of industries and applications, including automotive, manufacturing, mining, construction, and more. Their versatility makes them suitable for various power transmission systems.

7. Customization Options: Manufacturers offer a range of high-strength transmission chains with different sizes, pitches, and configurations. This allows for customization based on specific application requirements, ensuring optimal performance and reliability.

When considering the use of a high-strength transmission chain, it is crucial to assess the application’s load requirements, operating conditions, and environmental factors. Consulting with a knowledgeable supplier or engineer can help in selecting the most appropriate chain for the intended application.

transmission chain

How do roller chains differ from other types of transmission chains?

Roller chains, also known as roller link chains, are a commonly used type of transmission chain that distinguishes itself from other chains in several ways:

  • Design: Roller chains consist of inner and outer plates, pins, bushings, and rollers. The rollers, which are free to rotate, help reduce friction and wear, resulting in smoother and more efficient power transmission.
  • Wide Application: Roller chains are versatile and widely used in various industries, including automotive, industrial machinery, agricultural equipment, and conveyor systems.
  • High Load Capacity: Roller chains are designed to withstand high loads and offer excellent tensile strength, making them suitable for applications that require heavy-duty performance.
  • Efficiency: Roller chains are known for their high efficiency in transmitting power. The roller design minimizes friction, resulting in less energy loss and improved overall efficiency.
  • Cost-Effectiveness: Roller chains are relatively cost-effective compared to some other specialized transmission chains, making them a popular choice in many applications.

While roller chains have their advantages, it’s important to note that different types of transmission chains may be more suitable for specific applications. Factors such as load capacity, speed, noise level, and environmental conditions should be considered when selecting the appropriate transmission chain for a particular application.

China Hot selling Motorcycle Transmission Chain X-Ring Super Heavy Duty X-Ring Chain with Connecting Link  China Hot selling Motorcycle Transmission Chain X-Ring Super Heavy Duty X-Ring Chain with Connecting Link
editor by CX 2024-05-06